• Rdg165kn Room Thermostat with Knx Communications and Built-in Humidity Sensor and Humidity Control, AC 24 V, for Fan Coil Units and Universal Applications
  • Rdg165kn Room Thermostat with Knx Communications and Built-in Humidity Sensor and Humidity Control, AC 24 V, for Fan Coil Units and Universal Applications
  • Rdg165kn Room Thermostat with Knx Communications and Built-in Humidity Sensor and Humidity Control, AC 24 V, for Fan Coil Units and Universal Applications
  • Rdg165kn Room Thermostat with Knx Communications and Built-in Humidity Sensor and Humidity Control, AC 24 V, for Fan Coil Units and Universal Applications
  • Rdg165kn Room Thermostat with Knx Communications and Built-in Humidity Sensor and Humidity Control, AC 24 V, for Fan Coil Units and Universal Applications
  • Rdg165kn Room Thermostat with Knx Communications and Built-in Humidity Sensor and Humidity Control, AC 24 V, for Fan Coil Units and Universal Applications

Rdg165kn Room Thermostat with Knx Communications and Built-in Humidity Sensor and Humidity Control, AC 24 V, for Fan Coil Units and Universal Applications

Trademark: Honeywell
Customization:
Gold Member Since 2019

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
RDG165KN
HS Code
9032100000

Product Description

Rdg165kn Room Thermostat with Knx Communications and Built-in Humidity Sensor and Humidity Control, AC 24 V, for Fan Coil Units and Universal Applications
RDG165KN Room thermostat with KNX communications and built-in humidity sensor and humidity control, AC 24 V, for fan coil units and universal applications, heat pump, fan (1-/ 3-speed, DC), valves (2-point, DC)

 
  • KNX communications
  • For applications with DC control outputs and DC or 3-speed fan output
  • For applications with 2-position control output with DC fan output
  • 3 multifunctional inputs for keycard contact, external room / return air temperature (QAH11.1, QAA32), heat / cool changeover, Presence detector, window contact on/off, dewpoint monitor, electrical heater enabled, fault contact
  • Operating modes: Comfort, Economy and Protection
  • Automatic or manual EC fan or 1-/3-speed
  • Automatic or manual heating / cooling changeover
  • Adjustable commissioning and control parameters
  • Minimum and maximum setpoint limitation
  • Backlit display
  • Built-in humidity sensor and humidity control
Application selectable:

 
  • 2-pipe system
  • 2-pipe system with electrical heater
  • 2-pipe system and radiator / floor heating
  • 4-pipe system
  • 2-stage heating or cooling system
Technical Specifications:
  • Operating voltage   AC 24 V
  • Power consumption   2 VA / 2 W
  • Setpoint setting range  5…40 °C
  • Switching differential  Heating: 0.5…6 K Cooling: 0.5…6 K
  • Communication   Bus: KNX (S-Mode und LTE-Mode mit Synco 700)
  • Analog inputs, number   2
  • Analog outputs  Valve, el. heater: 2 , Fan: 1 (ECM)
  • Analog outputs, number  3
  • Analog output, signal   DC 0...10 V
  • Analog output, current   Max. ±1 mA
  • Digital inputs, number   1
  • Relay outputs   Valve, compressor or el. heater: 2 outputs, 2-position , Fan: 1- or 3-speed
  • Relay outputs, number  3 
  • Relay output, switching voltage   AC 24...230 V
  • Relay output, switching current   5 (4) A
  • Type of fixing   Wall mounting with screws
  • Degree of protection   IP30
  • Dimensions (W x H x D)    93 x 128 x 30.8 mm

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now